||Defi-Link Meter BF
Defi-Link Meter BFs are electronic blacked out gauges which are high response and refined design. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up and are in full affect.
Defi-Link Meter BFs need to be connected to Defi-Link Control Unit II. Up to 6 gauges can be connected and controlled by one Control Unit II. The name of the connection system is "Defi-Link System." Defi-Link System allows gauges to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system.
Defi-Link Control Unit II
Defi-Link Control Unit II is a necessary controller to install Defi-Link Meters, Defi-Link Meter BFs, and Defi-Link Displays. Up to 7 gauges and displays can be connected and controlled by one Control Unit II. The name of the connection system is "Defi-Link System."
Defi-Link System allows gauges and displays to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system
Driving data can be stored and can be replayed up to 3 minutes(*1). Pause, speed play, forward, and rewind function can be applied during playback.
Double Warning function by a meter's LED lamp and a beep(*2)
The switch panel is embossed and buzzer sounds by pushing the buttons.
The characters and the rings on the switch panel are illuminated in white at nighttime. It makes operation in the dark easy.
Defi-Link Indicator(sold separately) can be connected to M-WARNING connector. The indicator blinks when any of connected meters' warning LED lights.
Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed.(*3)
UP to 7 gauges among from Defi-Link Meters and Defi-Link Meter BFs and Defi-Link Displays can be operated with one Control Unit II. Microcomputers are equipped with meters and Control Unit II. A distant meter can be operated at hand.
Defi-Link Control Unit II Defi-Link Control Unit
*1 Data replay Up to 3 minutes Up to 40 seconds
*2 Warning LED and beep Only LED(no beeps)
*3 Differential Pressure Available N/A
Defi-Link Control Unit II is applicable only for 12V vehicles.
Defi-Link Control Unit II is necessary to operate Defi-Link Meter BF.
Defi-Link Control Unit II or Defi-Link Control Unit is necessary to operate Defi-Link Meter.
Defi-Link Control Unit II or Defi-Link Control Unit is necessary to operate Defi-Link Display.
Defi-Link Control Unit is not sold anymore.
Exclusive gauges for USA which are derived from quick-responsive and high-accurate Defi analog gauges. Boost, oil pressure, fuel pressure, temperature, exhaust temperature, and air/fuel gauges' diameter is 2 1/16inches(52mm). Tachometer's diameter is 4 1/2inches(115mm). The self-checking functions(Except Boost Gauge, Air/Fuel Gauge)
It is possible to confirm the performance of the Tachometer by the movement of the pointer.
a. Wire disconnection check
This function is meant to report any in-proper connections. Broken or disconnected sensor or sensor wire. The pointer will wave between 250 and 260 degrees.
b. Short circuit check
This function is meant to report any short circuit on the sensor or sensor wire. The pointer will wave between 10 and 20 degrees.
It is not possible to check short/open circuit of power wiring.
Stepping Motor drive(Except Boost Gauge)
a. Quick Response
Gauges pointers driven by stepping motor have a smooth instantaneous response to rapid acceleration of high performance vehicles.
b. High accuracy and light weight
Maximum angle of deflective, 270 degrees is controlled by the microcomputer up to 2,300 times to provide high precision in the accuracy of information generated.
c. Freedom of installation(Except Boost Gauge)
There is no "dumping of oil." The meter can be installed at any angle.
a. LED Lamps
The light is produced from high intense LED lamps. A bright transparent amber gauge dial and a red instrument pointer are used in the gauges to increase visibility at night and low-light applications.
b. Black bezel with red arrow
Bezel has a RED arrow and can be rotated by finger sand thumb, so that you can indicate your critical point, where you want.
c. Removable Back Bezel
The black bezel is removable, so you can choose either black bezel or aluminum bezel.
Defi-Link Display VSD CONCEPT is a product to display information on the speed, engine speed, and so on by reflecting the information on the windshield of vehicle. The projection technology is called "Heads Up Display(HUD)." VSD is our original technology focusing on compactness and universality utilizing the HUD technology. <>
By connecting this product to the Defi-Link System, oil temperature, water temperature, oil pressure, fuel pressure, and exhaust temperature can be displayed other than speed and engine speed.